Makita 9120 9122 193977-7 638344-4-2 Power Tool Battery Charger 9.6V

Features 

1. Wide Voltage Range to cover worldwide Voltages .

2. Quick Charge, saving charging time.

3. High Efficiency, Low Working Temperature .

4. Low Standby power consumption .

5. Smart charging management , multifunctional LED indicators.

6. Multi Proections, safe to use .

Pls notice : this smart charger is only workable on Ni-Cad or Ni-Mh battery packs ,not suitable for Li-ion battery packs 

This product only contains one piece charger, the battery is only for display purpose

Operation Methods 

Step 1. Connect the power cord to AC power , the smart charger will make self-detection ( indicator flashes from Green to Red ,then lights out )

Step.2 Connect the Crab leg Clips to the batteries' two polars ("+" and "-" ) respectively , Red coat Clip is"+" (Positive Polar ), Black coat Clip is "-" ( Negtive Polar) , if the connection is correct the indicator will shows RED light ,otherwise the indicator will not response ( Don't worry about the wrong connection way , even you do ,it wont make short circuit , our charger has intelligent IC chip built in :-)) .

Step. 3  Choose suitable charging current for your battery pack , if the battery capacity is less than 2000 mAh ,pls switch the switcher to 0.9Ah , if the battery capacity is over 2000mAh ,pls switch to 1.8Ah . If you want the battery charging faster you can still choose 1.8ah for a battery with battery capacity less than 2000mAh .

Step .4 Waiting for charging to be done .it will take hours to charge a battery pack to be FULL , once it's finished the RED indicator will turn to GREEN .

FITTING BATTERY MODELS 

Makita # 9120, 9122, 192595-8, 192596-6, 192638-6, 638344-4-2 192697-A 193058-7 193099-3 193156-7 9133 9134 9135 9135A